WB Engine 150, Adam by Dominique Longbien (France) is availa

Archive of the old Parsimony forum. Some messages couldn't be restored. Limitations: Search for authors does not work, Parsimony specific formats do not work, threaded view does not work properly. Posting is disabled.

WB Engine 150, Adam by Dominique Longbien (France) is availa

Postby Frank Quisinsky » 05 Jun 2002, 11:13

Geschrieben von: / Posted by: Frank Quisinsky at 05 June 2002 12:13:35:

Hi there,
the program Adam by Dominique Longbien is now available on WinBoard Download Area. More information can be found in my News Ticker.
Thanks Dominique!
Best
Frank

Frank`s Chess Page
Frank Quisinsky
 

It doesn't work!

Postby Igor Gorelikov » 05 Jun 2002, 11:50

Geschrieben von: / Posted by: Igor Gorelikov at 05 June 2002 12:50:13:
Als Antwort auf: / In reply to: WB Engine 150, Adam by Dominique Longbien (France) is available! geschrieben von: / posted by: Frank Quisinsky at 05 June 2002 12:13:35:
Hi there,
the program Adam by Dominique Longbien is now available on WinBoard Download Area. More information can be found in my News Ticker.
Thanks Dominique!
Best
Frank
While trying to run Adam 1.0 either in the text mode or in the Winboard one, I'v e got the same error message:
"ADAM_10 caused a stack fault in module KERNEL32.DLL at 0137:bff783e1."
(Windows'95, PI 100MHz 32MB)
Regards,
Igor
Igor Gorelikov
 

Re: Works fine for me ... see WinBoard debug!

Postby Frank Quisinsky » 05 Jun 2002, 11:55

Geschrieben von: / Posted by: Frank Quisinsky at 05 June 2002 12:55:48:
Als Antwort auf: / In reply to: It doesn't work! geschrieben von: / posted by: Igor Gorelikov at 05 June 2002 12:50:13:
Hi there,
the program Adam by Dominique Longbien is now available on WinBoard Download Area. More information can be found in my News Ticker.
Thanks Dominique!
Best
Frank
While trying to run Adam 1.0 either in the text mode or in the Winboard one, I'v e got the same error message:
"ADAM_10 caused a stack fault in module KERNEL32.DLL at 0137:bff783e1."
(Windows'95, PI 100MHz 32MB)
Regards,
Igor
Hi Igor,
on my Dual Pentium III 733Mhz System, Windows NT4 SP6a ...
Please look for Adam information on my News Ticker (Parameter = xboard)
"Adam_10 xboard" /fd=f:\WinBoard\Adam
"Adam_10 xboard" /sd=f:\WinBoard\Adam
I hope you can solved your problem, or a problem with Adam?
I cann't see any problems!
Best
Frank

recognized 'normal' (-1) as variant normal
WinBoard 4.2.6 + Adam_10
Reset(1, 0) from gameMode 0
recognized 'normal' (-1) as variant normal
GameEnds(0, (null), 2)
StartChildProcess (dir="f:\WinBoard\Adam") Adam_10 xboard
672 >first : xboard
protover 2
687 first : accepted playother
687 >first : accepted san
687 >first : accepted usermove
687 >first : accepted time
687 >first : accepted draw
687 >first : accepted sigint
687 >first : accepted sigterm
687 >first : accepted reuse
687 >first : rejected analyse
687 >first : rejected myname
687 >first : rejected variants
687 >first : accepted colors
687 >first : accepted ics
687 >first : accepted name
687 >first : accepted pause
687 >first : accepted done
703 >first : new
random
703 >first : level 40 10 0
703 >first : post
703 >first : hard
703 >first : ping 1
906 first : time 60000
otim 60000
4797 >first : e2e4
4797 first : time 59998
otim 59845
6359 >first : g1f3
6359
Frank Quisinsky
 

Re: Works fine for me ... see WinBoard debug!

Postby Frank Quisinsky » 05 Jun 2002, 11:58

Geschrieben von: / Posted by: Frank Quisinsky at 05 June 2002 12:58:42:
Als Antwort auf: / In reply to: Re: Works fine for me ... see WinBoard debug! geschrieben von: / posted by: Frank Quisinsky at 05 June 2002 12:55:48:

recognized 'normal' (-1) as variant normal
WinBoard 4.2.6 + Adam_10
Reset(1, 0) from gameMode 0
recognized 'normal' (-1) as variant normal
GameEnds(0, (null), 2)
StartChildProcess (dir="f:\WinBoard\Adam") Adam_10 xboard
672 >first : xboard
protover 2
687 first : accepted playother
687 >first : accepted san
687 >first : accepted usermove
687 >first : accepted time
687 >first : accepted draw
687 >first : accepted sigint
687 >first : accepted sigterm
687 >first : accepted reuse
687 >first : rejected analyse
687 >first : rejected myname
687 >first : rejected variants
687 >first : accepted colors
687 >first : accepted ics
687 >first : accepted name
687 >first : accepted pause
687 >first : accepted done
703 >first : new
random
703 >first : level 40 10 0
703 >first : post
703 >first : hard
703 >first : ping 1
906 first : time 60000
otim 60000
4797 >first : e2e4
4797 first : time 59998
otim 59845
6359 >first : g1f3
6359
Frank Quisinsky
 

Not working for me (WinBoard debug)

Postby Igor Gorelikov » 05 Jun 2002, 12:14

Geschrieben von: / Posted by: Igor Gorelikov at 05 June 2002 13:14:16:
Als Antwort auf: / In reply to: Re: Works fine for me ... see WinBoard debug! geschrieben von: / posted by: Frank Quisinsky at 05 June 2002 12:55:48:
Hi there,
the program Adam by Dominique Longbien is now available on WinBoard Download Area. More information can be found in my News Ticker.
Thanks Dominique!
Best
Frank
While trying to run Adam 1.0 either in the text mode or in the Winboard one, I'v e got the same error message:
"ADAM_10 caused a stack fault in module KERNEL32.DLL at 0137:bff783e1."
(Windows'95, PI 100MHz 32MB)
Regards,
Igor
Hi Igor,
on my Dual Pentium III 733Mhz System, Windows NT4 SP6a ...
Please look for Adam information on my News Ticker (Parameter = xboard)
"Adam_10 xboard" /fd=f:\WinBoard\Adam
"Adam_10 xboard" /sd=f:\WinBoard\Adam
I hope you can solved your problem, or a problem with Adam?
I cann't see any problems!
Best
Frank
Off course, I use xboard parameter
Here is a full winboard.debug (very short)

recognized 'normal' (-1) as variant normal
WinBoard 4.2.6 + Adam_10
Reset(1, 0) from gameMode 0
recognized 'normal' (-1) as variant normal
GameEnds(0, (null), 2)
StartChildProcess (dir="E:\CHESS\WinBoard\ENGINES\Adam_10") Adam_10 xboard
2590 >first : xboard
protover 2
12910 >first : new
random
13350 >first : level 0 5 0
13350 >first : post
13410 >first : hard
Fatal Error: Error: first chess program (Adam_10 xboard) exited unexpectedly
GameEnds(0, (null), 2)
23020 >first : force
23020 >first : quit
Igor Gorelikov
 

It works only for rich guys :-)

Postby Lyapko George » 05 Jun 2002, 12:14

Geschrieben von: / Posted by: Lyapko George at 05 June 2002 13:14:39:
Als Antwort auf: / In reply to: Re: Works fine for me ... see WinBoard debug! geschrieben von: / posted by: Frank Quisinsky at 05 June 2002 12:58:42:
It seems that Adam was compiled for Pentium III/Athlon XP only.
Here on AMD K6-2 it also crashes immediately.
Best regards,
George
Lyapko George
 

Re: It doesn't work!

Postby Alex » 05 Jun 2002, 12:16

Geschrieben von: / Posted by: Alex at 05 June 2002 13:16:24:
Als Antwort auf: / In reply to: It doesn't work! geschrieben von: / posted by: Igor Gorelikov at 05 June 2002 12:50:13:
Hello,
same problem here:
ADAM verursachte einen Fehler durch eine ungültige Seite
in Modul KERNEL32.DLL bei 0187:bff6a613.
Register:
EAX=00000000 CS=0187 EIP=bff6a613 EFLGS=00010293
EBX=00000000 SS=018f ESP=0066df1c EBP=0066df2c
ECX=00690038 DS=018f ESI=00690000 FS=41bf
EDX=00001004 ES=018f EDI=0069000c GS=0000
Bytes bei CS:EIP:
8b 03 25 fc ff ff 0f 3b 45 0c 0f 83 81 00 00 00
Stapelwerte:
00420c9d 00001000 00000004 ffffffff 0066df40 bff79235 00690000 00001004 00000000 0066df84 00411099 00690000 00000000 00001000 00421870 0041100b
(WinME, PIV, 128 MB)
Greetings,
Alex
Alex
 

Re: It works only for rich guys :-)

Postby P. Jon » 05 Jun 2002, 12:35

Geschrieben von: / Posted by: P. Jon at 05 June 2002 13:35:04:
Als Antwort auf: / In reply to: It works only for rich guys :-) geschrieben von: / posted by: Lyapko George at 05 June 2002 13:14:39:
It seems that Adam was compiled for Pentium III/Athlon XP only.
Here on AMD K6-2 it also crashes immediately.
Best regards,
George
I think the reason is not machine but windows (conflict DLL). I guess that Windows 98 or above will be ok.
P. Jon
 

Re: It works only for rich guys :-)

Postby Carlos E.A. Drake » 05 Jun 2002, 12:45

Geschrieben von: / Posted by: Carlos E.A. Drake at 05 June 2002 13:45:39:
Als Antwort auf: / In reply to: Re: It works only for rich guys :-) geschrieben von: / posted by: P. Jon at 05 June 2002 13:35:04:
AMD K6-2 500 crashes inmediatly, and Windows 98.
Is time to make a question to programer?
Regards!
Carlos
Carlos E.A. Drake
 

Re: It works only for rich guys :-) too bad....(n.t.)

Postby maria clara benedicto » 05 Jun 2002, 13:07

Geschrieben von: / Posted by: maria clara benedicto at 05 June 2002 14:07:03:
Als Antwort auf: / In reply to: Re: It works only for rich guys :-) geschrieben von: / posted by: Carlos E.A. Drake at 05 June 2002 13:45:39:
AMD K6-2 500 crashes inmediatly, and Windows 98.
Is time to make a question to programer?
Regards!
Carlos
maria clara benedicto
 

Perhaps don't

Postby Oscar Diez Cazon » 05 Jun 2002, 13:14

Geschrieben von: / Posted by: Oscar Diez Cazon at 05 June 2002 14:14:17:
Als Antwort auf: / In reply to: It works only for rich guys :-) geschrieben von: / posted by: Lyapko George at 05 June 2002 13:14:39:
It seems that Adam was compiled for Pentium III/Athlon XP only.
Here on AMD K6-2 it also crashes immediately.
Best regards,
George
In a pentium 100-120 under Windows NT works perfectly (in console mode)
Excuse for my very poor english (it´s more poor than my computer!!!)
Best regards.
P.D: Thanks for your great tournaments and test
Oscar Diez Cazon
 

Re: WB Engine 150, Adam by Dominique Longbien (France) is av

Postby Frank Quisinsky » 05 Jun 2002, 13:33

Geschrieben von: / Posted by: Frank Quisinsky at 05 June 2002 14:33:35:
Als Antwort auf: / In reply to: WB Engine 150, Adam by Dominique Longbien (France) is available! geschrieben von: / posted by: Frank Quisinsky at 05 June 2002 12:13:35:
Hi there,
the program Adam by Dominique Longbien is now available on WinBoard Download Area. More information can be found in my News Ticker.
Thanks Dominique!
Best
Frank
Hi Richboarders :-)
I wrote a mail to Dominique with a note to this forum and the messages.
Best
Frank
Frank Quisinsky
 

Re: It works only for rich guys :-) too bad....(n.t.)

Postby Dominique LONGBIEN » 05 Jun 2002, 14:48

Geschrieben von: / Posted by: Dominique LONGBIEN at 05 June 2002 15:48:18:
Als Antwort auf: / In reply to: Re: It works only for rich guys :-) too bad....(n.t.) geschrieben von: / posted by: maria clara benedicto at 05 June 2002 14:07:03:
AMD K6-2 500 crashes inmediatly, and Windows 98.
Is time to make a question to programer?
Regards!
Carlos
Sorry Guy,
I'm the Adam programmr
It looks like adam do not work on Windows 95 or 98, I never test it under these OS. I just make a test now, and it crashes. It work find with NT 4.0 2000 and XP
I need to find a computer with a compiler and W98 to make my tests, not so easy!
I will do my best in next release.
Thanks for your interrest.
Dom
Dominique LONGBIEN
 


Return to Archive (Old Parsimony Forum)

Who is online

Users browsing this forum: No registered users and 6 guests